Rubber Air Bags
Rubber-lined nylon bags or cushion designed bag is a kind of bag to protect the occupants of the vehicle and prevent serious injuries to them in the event of an accident or vehicle collision with obstacles that is put in the front or the car’s sides The embedded is called air bag.
Air bags are also commonly referred to as air cushion restraint system (ACRS) or air bag supplemental restraint system (SRS). The air bags are typically used as an inhibitor to impact the front, rear, and sides of the vehicle as well as rollovers so beside the seat belt can provide a two-dimensional support from the occupants.
These bags are designed to instantly open immediately after the impact on the car so that passengers in the car can hit airbags filled with gas or cushion gas instead of dealing with the body of the vehicle and cause serious damage to They do not enter.
Since the production of the first airbag that was inflatable bag to prevent damage to airplane while crash-landing during World War II, these bags have been constantly developing and improving. The first commercial air bag for vehicles was unveiled in the 1980s.
The airbag is also used for commercial purposes. In this regard, airbags are manufactured using very strong rubber in the form of very large inflatable and flexible bags, to which rescue workers are trapped to pick up a victim or heavy vehicles or debris Sold is used.
These bags are very effective in protecting the injured and preventing serious damage to the chest, head and spine.
The bags for the transportation and trucking industries are specially designed and manufactured and are often custom-made rubber. In the air transport system, a molded air bags are also used.
Air bags are typically specially designed for trucks that carry delicate and sensitive equipment because they need to control the vibrations and shocks on the road as much as possible.
Air bags can be produced in different sizes and shapes depending on the type of vehicle and type of vehicle requirements. The airbag is usually made of nylon woven or highly durable silicone rubber or EPDM synthetic rubber.
In the production of an airbag, synthetic rubber is usually used to cover the heat to protect the fabric against extreme heat, burning, etc., especially near the inflator assembly during production.
In some cases, in order to avoid sticking the fabric together, and flexibly and better opening the bag during accidents, talcum powder or starch powder is also used to cover the airbag. Today, the production of rubber-containing polyethylene with silicone and urethane coatings is less needed to create a heat shield coating during the production of the airbag, and is very low if it is used.
A very promising future for the rubber air bag can be imagined as there are many applications for these bags that include seat-mounted airbags for automobiles and helmets equipped with an airbag for motorcycles.
